PoolServ logo
    (361) 339-0035Get A Free Estimate

    Pool Equipment Repair in Aransas Pass, TX

    PoolServ provides expert pool equipment repair for homeowners across Aransas Pass and the surrounding coastal communities. Our locally owned team fixes heaters, filters, salt cells, lights, automation, and plumbing so your pool runs like it should.

    Locally Owned
    Certified and Insured
    Pool equipment repair in Aransas Pass pool equipment pad near Conn Brown Harbor

    Pool Equipment Repair Jobs We Handle in Aransas Pass

    Pool equipment in the Aransas Pass area faces South Texas heat, coastal salt air, and hard water that wear components down faster than inland areas. Our team repairs every type of pool equipment so your system runs reliably.

    Pool Heater Repair

    We fix gas and electric pool heaters that will not fire, show error codes, or fail to reach the set temperature. We diagnose the ignition, heat exchanger, and control board.

    Pool Filter Repair

    We fix leaking filters, broken multiport valves, and cracked filter bodies. We replace clamps, O-rings, and spider gaskets to stop leaks and restore proper filtration.

    Salt Cell Repair

    Salt cells build up calcium scale and stop producing chlorine. We clean or replace the cell, test the control board, and restore your salt system to full output.

    Pool Light Repair

    We fix pool lights that will not turn on, flicker, or have water inside the fixture. We also replace bulbs and repair the wiring and junction boxes.

    Automation System Repair

    We fix Pentair, Hayward, and Jandy automation systems with communication faults, unresponsive touchpads, and Wi-Fi connectivity issues. We test the wiring and control board.

    Pool Plumbing and Valve Repair

    We fix leaking valves, cracked pipes, and broken skimmers. We also repair booster pumps and the electrical components that power your pool system.

    Equipment Brands We Repair

    Pentair, Hayward, and Jandy Equipment

    We repair pool equipment from Pentair, Hayward, Jandy, and Zodiac across the Aransas Pass area. These brands cover the vast majority of pool equipment in South Texas pools. Our team carries common replacement parts like O-rings, gaskets, and sensors for fast repairs. We know the internal layout of each model so we can diagnose and fix the problem quickly.

    From Pentair MasterTemp heaters to Hayward ProGrid filters and Jandy AquaLink automation, we work on the full range of equipment these brands produce. That means fewer delays waiting for parts and faster repairs for you.

    Coastal Climate Expertise

    The coastal salt air around Aransas Pass corrodes pool equipment faster than inland areas. Heater components, electrical connections, and metal parts all wear faster in the salt air. Our team knows what to look for and how to protect your equipment from the coastal climate.

    We also help Aransas Pass homeowners choose equipment that holds up better in the coastal climate when a replacement is needed. We recommend models with corrosion-resistant materials and sealed electronics that last longer near the Gulf.

    How a Pool Equipment Repair Visit Works

    We follow a clear process so you understand the problem and the fix before any work starts.

    1

    We Diagnose the Equipment

    Our tech inspects the equipment, tests the components, and identifies the root cause. We explain what is wrong in plain language before recommending a fix.

    2

    We Send a Written Quote

    You get a clear written quote before any work begins. We explain the parts needed, the labor involved, and your options. No pressure, no surprise charges after we start.

    3

    We Complete and Verify the Repair

    Once you approve, we complete the repair and test the equipment under load. We confirm it runs properly and has no leaks before we pack up.

    Pool Filter Repair and Replacement in Aransas Pass

    Pool filters in the Aransas Pass area collect dust, pollen, and debris from the Gulf breeze and coastal air. When a filter starts leaking, the multiport valve sticks, or the filter body cracks, we diagnose the problem and recommend the right fix. We replace clamps, O-rings, and spider gaskets to stop leaks and restore proper filtration. If the filter body is cracked beyond repair, we recommend a replacement and give you a clear written quote.

    We also handle pool filter replacement when your old filter can no longer keep up with your pool. We size the new filter to your pool volume and plumbing so your water stays clear and your pump stays protected. You can also visit our pool equipment repair parent page for more details.

    Warning Signs You Need Pool Equipment Repair

    • Your pool heater will not fire or shows an error code on the display.
    • Your salt system shows a low chlorine or check cell warning.
    • Your pool filter is leaking or the multiport valve will not turn.
    • Your pool light will not turn on, flickers, or has water inside the fixture.

    Repair vs Replace: Which Is Right for Your Equipment?

    Many equipment problems can be fixed with a simple part swap. A bad O-ring, a worn gasket, or a failed sensor are all affordable repairs that extend the life of your equipment by years. We always try to repair first before recommending a replacement, because that saves you money. We give a free written quote after seeing your equipment, no pressure, so you can make the right call for your budget.

    When equipment is past its service life, corroded from the salt air, or the repair cost approaches the cost of new equipment, replacement makes more sense. New equipment often comes with a warranty and runs more efficiently. We help you compare the repair cost against a full replacement so you can choose with confidence. Either way, the decision is yours and we stand behind the work.

    Is Your Pool Equipment Acting Up?

    Get a free written quote from our locally owned team. No pressure, just clear answers about your Aransas Pass pool equipment.

    Get A Free Estimate

    Neighborhoods We Serve in Aransas Pass

    From the waterfront homes near City-by-the-Sea and Conn Brown Harbor to the family neighborhoods around Harbor City and Falman, our team knows the local conditions that affect your pool equipment. The coastal salt air around Aransas Pass corrodes equipment faster than inland areas, so we look for corrosion on every visit. You can also visit our Aransas Pass pool cleaning service city page for more details.

    City-by-the-Sea
    Harbor City
    Ingleside
    Ingleside on the Bay
    Falman
    Conn Brown Harbor

    Other Pool Services in Aransas Pass

    Beyond pool equipment repair, our team handles cleaning, pump repair, installation, and filter cleaning for homeowners across the Aransas Pass area.

    Pool Cleaning Service

    Learn more

    Pool Pump Repair

    Learn more

    Pool Equipment Installation

    Learn more

    Pool Filter Cleaning

    Learn more

    Pool Pump Installation

    Learn more

    Pool Equipment Repair FAQs

    Answers to the questions Aransas Pass homeowners ask before hiring a pool equipment repair service.

    What pool equipment do you repair in Aransas Pass?
    We repair pool heaters, filters, salt cells, pool lights, timers, automation systems, control panels, plumbing, valves, skimmers, booster pumps, and electrical components across the Aransas Pass area. Our team works on all major brands including Pentair, Hayward, Jandy, and Zodiac. We diagnose the problem and give you a written quote before any work starts.
    How do I know if my pool heater needs repair?
    Common signs your pool heater needs repair include the heater not firing, error codes on the display, water not reaching the set temperature, or the heater shutting off mid-cycle. The coastal salt air around Aransas Pass can corrode heater components faster than inland areas. We diagnose the ignition, heat exchanger, and control board to find the fault.
    Can you fix my pool automation system?
    Yes. We repair Pentair IntelliTouch, Hayward OmniLogic, and Jandy AquaLink automation systems. Common automation problems include lost communication between the controller and the pump or heater, unresponsive touchpads, and Wi-Fi connectivity issues. We test the wiring, the control board, and the communication cables to find the fault.
    Do you repair pool lights?
    Yes. We repair and replace LED pool lights and traditional incandescent pool lights. Common problems include lights that will not turn on, flickering lights, and water inside the light fixture. We also replace pool light bulbs and fix the wiring and junction boxes that power your pool lights.
    What does pool equipment repair cost in Aransas Pass?
    Every repair is different, so we give a free written quote after seeing your equipment, no pressure. The cost depends on the part that failed, the brand, and the labor involved. We keep our quotes clear and honest with no surprise add-ons after we start work.
    Can you fix a leaking pool filter?
    Yes. Pool filter leaks usually come from a bad clamp, O-ring, or a cracked filter body. We replace the clamps and O-rings to stop the leak and inspect the filter body for cracks. If the filter body is cracked beyond repair, we recommend a replacement and give you a clear written quote.

    Let Us Fix Your Pool Equipment

    Call now or request a free estimate and get a clear written quote from our locally owned team for your Aransas Pass pool equipment.

    Get A Free Estimate(361) 339-0035
    (361) 339-0035Get A Free Estimate