PoolServ logo
    (361) 339-0035Get A Free Estimate

    Pool Pump Repair in Aransas Pass, TX

    Conn Brown Harbor and the Aransas Pass ship channel throw brackish spray and tidal humidity at pool pumps that corrode motor housings and seize bearings faster than inland pools. PoolServ repairs and replaces pool pumps for Aransas Pass homeowners with a routine built for harbor-side conditions.

    Locally Owned
    Certified and Insured
    Pool pump repair in Aransas Pass pool equipment pad near Conn Brown Harbor

    Pool Pump Repair Jobs We Handle in Aransas Pass

    Pool pumps in the Aransas Pass area work hard against South Texas heat and coastal salt air. Our team diagnoses and fixes every type of pump problem so your water keeps circulating and your equipment stays healthy.

    Noisy Pump Motor Repair

    A loud pump usually means bad bearings, a worn impeller, or a vibrating mount. We find the noise source and fix it before the motor burns out completely.

    Pump Leak Repair

    Water pooling under the pump usually means a worn shaft seal or a cracked pump body. We replace seals and O-rings to stop leaks and protect your motor.

    Dead Pump and Capacitor Repair

    If your pump will not start at all, the capacitor, motor, or timer may be the problem. We test each component and replace only what is actually broken.

    Impeller and Seal Replacement

    A clogged or damaged impeller kills water flow. We open the pump, clear the blockage, replace worn seals, and get your circulation back to full strength.

    Variable Speed Pump Repair

    Variable speed pumps have drive boards and control pads that can fail. We diagnose the electronics and repair or replace the failing components.

    Pump Motor Replacement

    When a motor is past its service life, we replace it with a matching motor sized to your pump and pool. We also upgrade to variable speed when it makes sense.

    Pump Brands We Repair

    Pentair, Hayward, and Jandy Pumps

    We repair pool pumps from Pentair, Hayward, Jandy, and Zodiac across the Aransas Pass area. These brands cover the majority of pumps in South Texas pools, and our team carries common replacement parts like capacitors, shaft seals, and impellers for fast repairs. We know the internal layout of each model so we can diagnose and fix the problem quickly.

    From Pentair IntelliFlo variable speed pumps to Hayward Super Pump single speed models and Jandy ePump systems, we work on the full range of pumps these brands produce. That means fewer delays waiting for parts and faster repairs for you.

    Variable Speed Pump Expertise

    Variable speed pumps are more complex than single speed pumps because they use drive boards, control pads, and communication cables. Our team has the training and tools to diagnose electronic failures in these systems. We test the drive board, the control pad, and the communication wiring to find the real fault.

    We also help Aransas Pass homeowners upgrade from single speed to variable speed pumps, which use far less electricity and run much quieter. We size the new pump to your pool and plumbing, program the speed schedules, and make sure it works with your automation system if you have one.

    How a Pool Pump Repair Visit Works

    We follow a clear process so you understand the problem and the fix before any work starts.

    1

    We Diagnose the Pump

    Our tech inspects the pump, tests the motor, capacitor, and seal, and identifies the root cause. We explain what is wrong in plain language before recommending a fix.

    2

    We Send a Written Quote

    You get a clear written quote before any work begins. We explain the parts needed, the labor involved, and your options. No pressure, no surprise charges after we start.

    3

    We Complete and Verify the Repair

    Once you approve, we complete the repair and test the pump under load. We confirm it runs quietly, moves water properly, and has no leaks before we pack up.

    Pool Pump Replacement in Aransas Pass

    When a pump motor is past its service life or the repair cost approaches the cost of a new pump, replacement makes more sense. We help Aransas Pass homeowners choose the right replacement pump based on pool size, plumbing, and budget. We also handle pool pump motor replacement when the pump body is still good but the motor has failed.

    We also install variable speed pump upgrades that use far less electricity and run much quieter than older single speed pumps. We size the new pump to your pool volume and plumbing, program the speed schedules, and make sure it communicates with your automation system if you have one. You can also visit our pool pump repair parent page for more details.

    Warning Signs You Need Pool Pump Repair

    • Your pump is making a loud grinding, screeching, or humming noise.
    • Water is leaking from under the pump or from the seal between the motor and pump body.
    • The pump will not start, or it hums but does not spin.
    • Water flow from the returns is weak even though the pump is running.

    Repair vs Replace: Which Is Right for Your Pump?

    Many pump problems can be fixed with a simple part swap. A bad capacitor, a worn shaft seal, or a clogged impeller are all affordable repairs that extend the life of your pump by years. We always try to repair first before recommending a replacement, because that saves you money. We give a free written quote after seeing your pump, no pressure, so you can make the right call for your budget.

    When a motor is past its service life, drawing high amps, or making grinding noises from bad bearings, replacement makes more sense. A new pump, especially a variable speed model, runs more efficiently and often comes with a warranty that protects your investment. We help you compare the repair cost against a full replacement so you can choose with confidence. Either way, the decision is yours and we stand behind the work.

    Is Your Pool Pump Not Working Right?

    Get a free written quote from our locally owned team. No pressure, just clear answers about your Aransas Pass pool pump.

    Get A Free Estimate

    Neighborhoods We Serve in Aransas Pass

    From the waterfront homes near City-by-the-Sea and Conn Brown Harbor to the family neighborhoods around Harbor City and Falman, pool pumps across Aransas Pass deal with brackish spray, tidal humidity, and galvanic corrosion. Our team knows the common pump failures in this harbor-side area and responds fast. You can also visit our Aransas Pass pool cleaning service city page for more details.

    City-by-the-Sea
    Harbor City
    Ingleside
    Ingleside on the Bay
    Falman
    Conn Brown Harbor

    Other Pool Services in Aransas Pass

    Beyond pool pump repair, our team handles cleaning, equipment repair, installation, and filter cleaning for homeowners across the Aransas Pass area.

    Pool Cleaning Service

    Learn more

    Pool Equipment Repair

    Learn more

    Pool Equipment Installation

    Learn more

    Pool Filter Cleaning

    Learn more

    Pool Pump Installation

    Learn more

    Pool Pump Repair FAQs

    Answers to the questions Aransas Pass homeowners ask before hiring a pool pump repair service.

    My Aransas Pass pump motor housing is pitting and rusting. Is that the harbor salt?
    Brackish spray off Conn Brown Harbor and the ship channel corrodes motor housings, fan covers, and hardware fasteners on harbor-side pumps, often within a few seasons. We inspect the motor housing for pitting and rust on every visit, treat exposed hardware, and recommend sealed or corrosion rated motors when a replacement makes more sense than a repair. A motor cover can slow the damage if your pump sits open to the breeze.
    My harbor-side pump keeps tripping the breaker. Can you fix that?
    Tidal humidity and salt spray can cause moisture inside the motor or a shorted winding that trips the breaker the moment the pump tries to start. We megger the motor to check for insulation breakdown, dry out the terminal box if moisture is the cause, and replace the motor if the windings are compromised. We also confirm your GFCI and breaker are sized correctly for a harbor-side environment.
    What does pool pump repair cost in Aransas Pass?
    Every repair is different, so we give a free written quote after seeing your pump, no pressure. The cost depends on the part that failed, the pump brand, and the labor involved. We keep our quotes clear and honest with no surprise add-ons after we start work.
    Do you repair variable speed pool pumps near Conn Brown Harbor?
    Yes. We repair variable speed pumps from Pentair IntelliFlo, Hayward Super Pump VS, and Jandy ePump. The drive boards on these pumps are sensitive to the power surges and salt exposure common around the harbor, so we load test the board and check the control pad for corrosion before recommending a fix.
    Are you insured for pool pump repair in Aransas Pass?
    Yes. PoolServ is an insured pool service company serving Aransas Pass and the surrounding Coastal Bend. Your property stays protected while we work, and our team follows proper safety and electrical standards on every pump repair.
    What happens if my Aransas Pass pump dies between service visits?
    Call us right away. A dead pump means no circulation, and still harbor water turns green fast in the South Texas heat. We prioritize pump failures on our route, bring common parts like capacitors and shaft seals, and get your water moving again. If the repair needs a special order, we set up a temporary plan to keep your pool from going green while we wait.

    Let Us Fix Your Pool Pump

    Call now or request a free estimate and get a clear written quote from our locally owned team for your Aransas Pass pool pump.

    Get A Free Estimate(361) 339-0035
    (361) 339-0035Get A Free Estimate