PoolServ provides expert pool pump repair for homeowners across Three Rivers and the surrounding rural communities near Choke Canyon. Our locally owned team diagnoses noisy, leaking, or dead pumps and gets your water moving again.

A pool pump has several parts that can fail over time, especially in the South Texas heat and dust near Choke Canyon. Our team diagnoses the real problem and fixes it so your water keeps circulating and your pool stays clean.
Screeching, humming, or rattling sounds point to worn bearings, a bad capacitor, or debris in the impeller. We find the noise source and fix it before the motor burns out.
Water leaking from under the pump housing usually means a worn shaft seal or a cracked housing. We replace seals and gaskets to stop the leak and protect your motor.
If your pump will not start, the issue could be the capacitor, the timer, the wiring, or the motor itself. We test each part to find the real cause and get it running again.
Weak water flow often comes from a clogged impeller, air in the system, or a failing motor. We clear the blockage and check the suction side to restore full flow.
Variable speed pumps have drive boards and control screens that need specialized diagnosis. We read the error codes and test the electronics to find the fault.
A bad capacitor is the most common pump failure and costs far less than a full motor swap. If the motor is burned out, we replace it with a quality unit matched to your pump.
We repair and install pumps from Hayward, Pentair, Jandy, and Zodiac. These brands make up the majority of pumps in the Three Rivers area, and our team carries common parts like capacitors, shaft seals, and impellers for fast repairs. We know the differences between each model line so we diagnose the right part the first time.
For older pumps that are past repair, we can match the horsepower and plumbing with a direct replacement. We also help homeowners upgrade to variable speed pumps, which run quieter and use far less electricity than single speed models.
We work with the Pentair IntelliFlo, Hayward Super Pump VS, and Jandy Pro Series ePump lines. These pumps have drive boards, control pads, and communication cables that need specialized testing. Our team reads the error codes and checks the drive board before recommending a fix.
Variable speed pumps can fail from power surges, overheating, or communication errors with automation systems. We test the full circuit so we do not replace a board that is not actually broken. That saves you money and gets your pump running sooner.
We follow a clear process so you understand the problem and the fix before any work starts.
Our tech inspects the pump, listens to the motor, checks the electrical connections, and tests the capacitor and impeller. We tell you exactly what is wrong before we recommend a fix.
You get a clear written quote before any work begins. We explain the parts needed, the labor involved, and your options. No pressure, no surprise charges after we start.
Once you approve, we complete the repair and test the pump under load. We confirm the water is flowing, the motor runs quiet, and there are no leaks before we pack up.
When a pump motor is burned out or the housing is cracked, pool pump replacement is often the better path. We size the new pump to your pool volume and plumbing so you get the right flow without overworking the system. Our team removes the old unit, updates the plumbing connections, and sets the new pump on a level pad.
We also handle pool pump motor replacement when the housing and impeller are still in good shape. Swapping just the motor costs less than a full pump replacement and gets your water moving again fast. We match the horsepower, voltage, and frame size so the new motor bolts right in.
Many pump problems can be fixed with a simple part swap. A bad capacitor, a worn shaft seal, or a clogged impeller are all affordable repairs that extend the life of your pump by years. We always try to repair first before recommending a replacement, because that saves you money. We give a free written quote after seeing your pump, no pressure, so you can make the right call for your budget.
When the motor is burned out, the housing is cracked, or the pump is old enough that repairs keep adding up, replacement makes more sense. A new variable speed pump runs quieter, uses less electricity, and often pays for itself over time through lower energy bills. We help you compare the repair cost against a full replacement so you can choose with confidence. Either way, the decision is yours and we stand behind the work.
Get a free written quote from our locally owned team. No pressure, just clear answers about your Three Rivers pool pump.
Get A Free EstimateFrom the rural properties around Calliham to the family homes near Oakville and Whitsett, our team knows the local conditions that affect your pool pump. South Texas heat, dust, and well water minerals put extra strain on pump motors and seals. You can also visit our Three Rivers pool cleaning service city page for more details.
Beyond pool pump repair, our team handles cleaning, equipment repair, installation, and filter cleaning for homeowners across the Three Rivers area.
Answers to the questions Three Rivers homeowners ask before hiring a pool pump repair service.
Call now or request a free estimate and get a clear written quote from our locally owned team for your Three Rivers pool pump.