PoolServ logo
    (361) 339-0035Get A Free Estimate

    Pool Equipment Repair in Skidmore, TX

    PoolServ provides expert pool equipment repair for homeowners across Skidmore and the surrounding Bee County communities. Our locally owned team fixes heaters, filters, salt cells, lights, valves, and plumbing so your pool system runs right.

    Locally Owned
    Certified and Insured
    Pool equipment repair in Skidmore pool equipment pad

    Pool Equipment Repair Jobs We Handle in Skidmore

    Pool equipment takes a beating in the South Texas heat and dust of Bee County. Our team diagnoses and fixes every part of your pool system so your water stays clean, warm, and safe.

    Pool Heater Repair

    If your heater will not fire, we check the burners, igniter, pressure switch, and gas supply. We find the cause and get your pool warm again before the cool months hit.

    Pool Filter Repair and Replacement

    A cracked filter tank, bad multiport valve, or torn grid can kill your water flow. We repair or replace the filter so your system traps debris properly again.

    Salt Cell and Salt System Repair

    If your salt system shows low chlorine warnings, the cell may be scaled or failing. We clean or replace the cell and check the control board and sensors.

    Pool Light Repair

    Pool lights fail from water intrusion, bad bulbs, or faulty transformers. We replace bulbs, fix lenses, and check the GFCI and wiring so your pool is safe at night.

    Pool Automation and Control Repair

    If your automation system lost Wi-Fi or the control screen is unresponsive, we test the board, relays, and communication cables to find the fault.

    Pool Valve and Plumbing Repair

    Leaking valves and cracked plumbing lines waste water and reduce flow. We replace valves, fix leaks, and reroute plumbing so your system runs efficiently.

    Equipment Brands We Repair

    Pentair, Hayward, and Jandy Systems

    We repair equipment from Pentair, Hayward, Jandy, and Zodiac across the Skidmore area. These brands cover the majority of pool systems in South Texas, and our team carries common replacement parts for fast repairs. We know the differences between each model line so we diagnose the right part the first time.

    From Pentair IntelliFlo pumps to Hayward AquaRite salt systems and Jandy heaters, we work on the full range of equipment these brands produce. That means fewer delays waiting for a specialist and faster repairs for you.

    Automation and Salt Systems

    We repair automation systems from Pentair IntelliCenter, Hayward OmniLogic, and Jandy iAqualink. These systems control your pump, heater, lights, and salt cell from one panel or your phone. When the communication between components breaks, we test the wiring and relays to find the real fault.

    For salt systems, we work with Pentair IntelliChlor, Hayward AquaRite, and Jandy AquaPure. We clean or replace salt cells, test the control boards, and calibrate the output so your chlorine production stays steady.

    How a Pool Equipment Repair Visit Works

    We follow a clear process so you understand the problem and the fix before any work starts.

    1

    We Diagnose the Equipment

    Our tech inspects the failing equipment, tests the electrical and mechanical parts, and identifies the root cause. We explain what is wrong in plain language before recommending a fix.

    2

    We Send a Written Quote

    You get a clear written quote before any work begins. We explain the parts needed, the labor involved, and your options. No pressure, no surprise charges after we start.

    3

    We Complete and Verify the Repair

    Once you approve, we complete the repair and test the equipment under load. We confirm everything runs properly and there are no leaks or error codes before we pack up.

    Pool Heater Repair in Skidmore

    Pool heaters in the Skidmore area work hard during the cooler months, and they fail for many reasons. Dirty burners, faulty igniters, bad pressure switches, and low gas pressure are the most common issues. We inspect the full heater, find the cause, and give you a written quote before any work starts. If the heat exchanger is cracked or the heater is past its service life, we will tell you honestly.

    We also handle pool heater replacement when repair is no longer the smart choice. A new gas heater or electric heat pump can bring your pool back to comfortable temperatures more efficiently. We size the new heater to your pool volume and help you compare gas versus electric options based on your setup and how often you use the pool.

    Warning Signs You Need Pool Equipment Repair

    • Your pool heater will not fire up or shuts down mid-cycle.
    • Your salt system shows a low chlorine or low salt warning even after adding salt.
    • Your pool light is out, flickering, or tripping the GFCI breaker.
    • Your automation system lost Wi-Fi or the control screen is unresponsive.

    Repair vs Replace: Which Is Right for Your Equipment?

    Many equipment problems can be fixed with a simple part swap. A bad igniter, a torn filter grid, or a scaled salt cell are all affordable repairs that extend the life of your equipment by years. We always try to repair first before recommending a replacement, because that saves you money. We give a free written quote after seeing your equipment, no pressure, so you can make the right call for your budget.

    When a heater has a cracked heat exchanger, a filter tank is cracked, or a salt cell is past its service life, replacement makes more sense. New equipment runs more efficiently and often comes with a warranty that protects your investment. We help you compare the repair cost against a full replacement so you can choose with confidence. Either way, the decision is yours and we stand behind the work.

    Is Your Pool Equipment Not Working Right?

    Get a free written quote from our locally owned team. No pressure, just clear answers about your Skidmore pool equipment.

    Get A Free Estimate

    Neighborhoods We Serve in Skidmore

    From the family homes near Tynan to the rural properties around Olmos and Pettus, our team knows the local conditions that affect your pool equipment. South Texas heat, dust, and well water minerals put extra strain on heaters, filters, and salt cells. You can also visit our Skidmore pool cleaning service city page for more details.

    Tynan
    Papalote
    Olmos
    Pettus
    Tuleta
    Beeville

    Other Pool Services in Skidmore

    Beyond pool equipment repair, our team handles cleaning, pump repair, installation, and filter cleaning for homeowners across the Skidmore area.

    Pool Cleaning Service

    Learn more

    Pool Pump Repair

    Learn more

    Pool Equipment Installation

    Learn more

    Pool Filter Cleaning

    Learn more

    Pool Pump Installation

    Learn more

    Pool Equipment Repair FAQs

    Answers to the questions Skidmore homeowners ask before hiring a pool equipment repair service.

    What types of pool equipment do you repair in Skidmore?
    We repair pool heaters, filters, salt cells and salt systems, pool lights, timers, control panels, automation systems, valves, plumbing, skimmers, booster pumps, and pool cleaners. If it is part of your pool system and it is not working right, our team can diagnose and fix it. We work on all major brands and handle both mechanical and electrical failures.
    Can you repair my pool heater if it will not fire up?
    Yes. Pool heater repair is one of our most common calls. Heaters fail to fire for many reasons including dirty burners, faulty igniters, bad pressure switches, or low gas pressure. We inspect the full heater, find the cause, and give you a written quote before any work starts. If the heat exchanger is cracked or the heater is past its service life, we will tell you honestly.
    How do I know if my salt cell needs repair or cleaning?
    If your salt system shows a low chlorine or low salt warning even after adding salt, the cell may be scaled up or failing. We can clean the cell to remove calcium buildup and test its output. If the cell is worn out, we replace it. We also check the control board and sensors since those can cause the same warning.
    Do you repair pool automation and control systems?
    Yes. We repair pool automation systems from Pentair IntelliCenter, Hayward OmniLogic, and Jandy iAqualink. Common automation problems include lost Wi-Fi connection, unresponsive control screens, and relay failures. We test the wiring, the control board, and the communication cables to find the real fault.
    What does pool equipment repair cost in Skidmore?
    Every repair is different, so we give a free written quote after seeing your equipment, no pressure. The cost depends on the part that failed, the brand, and the labor involved. We keep our quotes clear and honest with no surprise add-ons after we start work.
    Can you fix a pool light that has stopped working?
    Yes. Pool light repair covers bulb replacement, bad transformers, broken lenses, and water intrusion in the light niche. We also check the GFCI breaker and the wiring from the junction box to the light. If your light keeps tripping the breaker, we find the short and fix it safely.

    Let Us Fix Your Pool Equipment

    Call now or request a free estimate and get a clear written quote from our locally owned team for your Skidmore pool equipment.

    Get A Free Estimate(361) 339-0035
    (361) 339-0035Get A Free Estimate